邏輯示波器 Tektronix TLS216
廠家: 美國泰克
16通道，可作示波器，可作邏輯分析儀
可外接VGA顯示器，MS DOS格式兼容軟驅
基本參數
- 2.5 pF, 1 megaohm Podlet Style FET Probes
- 顯示模式：模擬、時序圖和總線模式
- <±100 ps 時間分辨率
- 16 Input Channels
- 所有通道 2 GS/s 同步采樣
- 500?MHz 實時帶寬
- Logic Family Presets for TTL, ECL and CMOS
- Sophisticated Time Qualified Triggering with Four Word Recognizers
優(yōu)勢特點
- Facilitates Hands-free Connection to SMT Devices
- Low-capacitance Probe for Nonintrusive Probing
- 強大的觸發(fā)功能大大縮短故障定位的時間
- 混合模式顯示更易于發(fā)現時序故障
- 所有通道高速取樣易于分析復雜綜合的交互系統(tǒng)
應用
TLS216 Logic Scope
The TLS216 Logic Scope is a new class of instrument designed to simplify the task of debugging digital hardware. The Logic Scope seamlessly combines in a single instrument the analog acquisition system of a high-speed digital storage oscilloscope (DSO) with the triggering and display systems of a logic analyzer. The 500?MHz bandwidth Logic Scope samples all channels simultaneously at 2 GS/s and has sophisticated time-qualified triggering, a high resolution color display and an integrated MS DOS compatible 3.5 inch floppy disk drive.
Sophisticated Triggering to Identify Complex Digital Problems
In addition to edge trigger, most digital signals can be easily captured using pulse, glitch and pattern triggers. The Logic Scope provides two new trigger resources that allow the instrument to directly trigger on common digital circuit behavior. The industry's first time-interval or sequence trigger type monitors the time between two events, allowing the instrument to easily trigger on setup time violations, hold-time violations or unexpected propagation delay. The powerful "Time-out" trigger type can be used to capture incomplete handshake sequences or to trigger the instrument when the DUT "hangs".
All of these trigger types let developers identify channel-to-channel relationships, including 16-Bit patterns and time-related/time-qualified system faults. The Logic Scope's external trigger-input can be used as a "Trigger Arm" to enhance cross-triggering between two instruments, simplifying the task of using a Logic Scope with other test equipment.
2.5 pF, Low-mass FET Probes Ensure Nonintrusive Connection
The Logic Scope includes a set of 16 specially designed probes that have extremely low probe-tip mass (1.5 grams) and input capacitance (2.5 pF). The P6240 low probe-tip mass ensures that connections made to surface mount and fine pitch ICs will be reliable. The low input capacitance, combined with the 1 megaohm input resistance, decreases the effect of the probe on the DUT's operation, allowing very accurate measurements to be made with confidence.
These characteristics are made possible by using a "podlet-style" probe-tip design instead of the "pencil-style" design of traditional oscilloscope probes. Employing the de facto industry standard of 0.1 inch spacing between the signal and ground inputs, each 0.1 inch thick podlet can directly attach to the hundreds of readily available IC adapters and clips.