《電子技術應用》
您所在的位置:首頁 > 電源技術 > 解決方案 > ADIADuM4471隔離DC-DC控制器參考設計方案

ADIADuM4471隔離DC-DC控制器參考設計方案

2013-07-22
作者:ADI

ADI公司的ADuM4471是一款內嵌MOSFET驅動器和校準器的四通道數字光電隔離DC-DC功率控制器,基于ADI先進iCoupler®技術,該控制器內部集成次邊PWM光電隔離反饋補償回路。有效減少了外部光電隔離電路和補償回路的元器件,為實現小型化設計提供了基礎。該控制器輸入電壓為5V或3V,輸出電壓范圍為:3.3V-24V。單路輸出功率可以達到2.5W。四通道可分別靈活獨立配置,以滿足用戶不同的應用需要。本文介紹了DADuM4471芯片的主要特性、方框圖、應用方向。評估板EVAL-ADuM5211EBZ的主要特性、電路圖、材料清單和PCB元件布局圖。

The ADuM4470/ADuM4471/ADuM4472/ADuM4473/ADuM44741 are quad-channel, digital isolators with a regulated dc-to-dc isolated power supply controller and an internal MOSFET driver. The dc-to-dc controller has an internal isolated PWM feedback from the secondary side, based on the iCoupler? chip scale transformer technology and complete loop compensation. This eliminates the need to use an optocoupler for feedback and compensates the loop for stability. 
         
The ADuM447x isolators provide a more stable output voltage and higher efficiency compared to unregulated isolated dc- to-dc power supplies. The fully integrated feedback and loop compensation in a wide-body SOIC package provide a smaller form factor and 8.3 mm creepage distance solution.

The regulated feedback provides a relatively flat efficiency curve over the full output power range. The ADuM447x enable a dc-to-dc converter with a 3.3 V to 24 V isolated output voltage range from either a 5.0 V or a 3.3 V input voltage, with an output power of up to 2.5 W. The ADuM447x isolators provide four independent isolation channels in a variety of channel configurations and data rates.

ADuM4471主要特性:

Isolated PWM feedback with built in compensation
Primary side transformer driver for up to 2.5 W output power with 5 V input voltage
Regulated adjustable output: 3.3 V to 24 V
Up to 80% efficiency
Quad dc-to-25 Mbps (NRZ) signal isolation channels
200 kHz to 1 MHz adjustable oscillator
Soft start function at power-up
Pulse-by-pulse overcurrent protection
Thermal shutdown
5000 V rms isolation
High common-mode transient immunity: >25 kV/μs
20-lead SOIC package with 8.3 mm creepage
High temperature operation: 105°C

ADuM4471應用:

Power supply start-up bias and gate drives
Isolated sensor interfaces
Process controls
RS-232/RS-422/RS-485 transceivers  

圖1. ADuM4471方框圖

EVAL-ADuM4471EBZ 主要特性:

ADuM447x circuits, including 5 kV rms isolated dc-to-dc converters
Single supply (default)
5 V input to 5 V output (regulated)
Reconfigurable to 5 V input to 3.3 V output or 3.3 V input to 3.3 V output
Double supply
5 V input to 15 V output (regulated) and 7.5 V output (unregulated)
Reconfigurable to 5 V input to 12 V output (regulated) and 6 V output (unregulated)
Footprints for Coilcraft, Inc., and Halo Electronics, Inc., transformer options
Multiple switching frequency options

EVAL-ADuM4471EBZ電路圖:



圖2. EVAL-ADuM4471EBZ電路圖

EVAL-ADuM4471EBZ材料清單:


PCB元件布局圖:



 


本站內容除特別聲明的原創(chuàng)文章之外,轉載內容只為傳遞更多信息,并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創(chuàng)文章及圖片等內容無法一一聯系確認版權者。如涉及作品內容、版權和其它問題,請及時通過電子郵件或電話通知我們,以便迅速采取適當措施,避免給雙方造成不必要的經濟損失。聯系電話:010-82306118;郵箱:aet@chinaaet.com。