基于SIP技術的固態硬盤電路設計
電子技術應用
楊楚瑋,張梅娟,沈慶
中國電子科技集團公司第五十八研究所, 江蘇 無錫 214035
摘要: 存儲系統小型化、高性能需求與日俱增,為此設計了一款基于SiP技術的固態硬盤電路,用于驗證存儲系統SiP電路的可行性。該SiP電路內部以SSD控制模塊為核心處理單元,集成了用于數據存儲的NAND顆粒、用于固件存儲的SPI Flash以及電源管理等元器件。在搭建的軟硬件平臺上進行底層ATA指令驗證以及與傳統分離式存儲系統的對比性能測試,證明了應用SiP技術的存儲系統具備高性能、小型化、低功耗等諸多優勢,為后續SiP存儲系統的設計和驗證奠定了一定的技術基礎。
中圖分類號:TN401 文獻標志碼:A DOI: 10.16157/j.issn.0258-7998.234276
中文引用格式: 楊楚瑋,張梅娟,沈慶. 基于SIP技術的固態硬盤電路設計[J]. 電子技術應用,2024,50(3):36-41.
英文引用格式: Yang Chuwei,Zhang Meijuan,Shen Qing. The designation of solid state drive circuit based on SiP technology[J]. Application of Electronic Technique,2024,50(3):36-41.
中文引用格式: 楊楚瑋,張梅娟,沈慶. 基于SIP技術的固態硬盤電路設計[J]. 電子技術應用,2024,50(3):36-41.
英文引用格式: Yang Chuwei,Zhang Meijuan,Shen Qing. The designation of solid state drive circuit based on SiP technology[J]. Application of Electronic Technique,2024,50(3):36-41.
The designation of solid state drive circuit based on SiP technology
Yang Chuwei,Zhang Meijuan,Shen Qing
The 58th Research Institute, CETC , Wuxi 214035 , China
Abstract: The demand for miniaturization and high performance of storage system is increasing day by day. Therefore, this paper designs a solid state drive circuit based on system in package(SiP) technology to verify the feasibility of SiP circuit of storage system. The SiP circuit uses SSD controller module as the core processing unit, integrating NAND for data storage, SPI Flash for firmware storage and power management. The verification of ATA instructions on the hardware and software platform and the performance test compared with the traditional separated storage system prove that the storage system with SiP technology has many advantages, such as high performance, miniaturization and low power, which lays a certain technical foundation for the design and verification of SiP storage system.
Key words : system in package (SiP);storage system;SSD controller module;miniaturization
引言
隨著固態硬盤(Solid State Disk, SSD)小型化、高性能、高穩定性的要求越來越高,在確保安全穩定的前提下,提高集成度有利于存儲系統體積的縮小和功耗的降低。然而,傳統SSD設計采用分離式設計方式,在PCB板級上多個芯片進行組合,各類元器件使得PCB板卡面積龐大,且存在較嚴重的功耗和散熱問題[1-3]。
本文詳細內容請下載:
http://theprogrammingfactory.com/resource/share/2000005913
作者信息:
楊楚瑋,張梅娟,沈慶
中國電子科技集團公司第五十八研究所
此內容為AET網站原創,未經授權禁止轉載。